DIN 2.1285 (C17500) Beryllium Bronze Wires With State A(TB00), H(TD04), AT(TF00), HT(TH04)
Product Description:
Name: Beryllium Bronze Wires
Grade: DIN 2.1285 (C17500)
Specification: Thickness 0.8mm-1mm
Surface: Bright
State: A(TB00), H(TD04), AT(TF00), HT(TH04)
Features: Good strength and hardness
Application: For Seam Welding Dies
CUBERYLLIUM® manufactures copper beryllium in several distinct compositions. These fall into two categories: alloys selected for high strength (Alloys 172,173,170) and alloys selected for high conductivity (Alloys 751,750,741). And Gost standard QBe2,QBe1.9Ti for Russia Market. Also Supply Master alloy : CuBeryllium-200; CuBeryllium-275);CuBeryllium-350 and Cuberyllium-400 to global factory.
CUBERYLLIUM ®-750 also named -C17500 (CDA 750) combine moderate yield strength, up to 960Mpa(140ksi), with electrical and thermal conductivity from 45 to 60 % of pure copper. Alloys 750 and 751 are available in wrought product forms and can be supplied fully hardened. Hardened products are identified by the temper designation AT or HT, and have good formability.
Chemical Composition of DIN 2.1285 (C17500) Beryllium Bronze Alloy:
| CUBERYLLIUM® Brand | UNS-Number | Beryllium | Cobalt | Fe | Si | Copper |
| Cuberyllium-C750 | C17500 | 0.40-0.70 | 2.4～2.7 | <0.1 | <0.2 | Balance |
Note: Copper plus additions equal 99.5% Min.
Typical Physical Properties of DIN 2.1285 (C17500) Beryllium Bronze Alloy:
| Melting Point - Liquidus °F | 1955 |
| Melting Point - Solidus °F | 1885 |
| Density lb/cu in. at 68°F | 0.311 |
| Specific Gravity | 8.62 |
| Electrical Conductivity % IACS at 68°F | 45 (1) |
| Thermal Conductivity Btu/ sq ft/ ft hr/ °F at 68°F | 120 (2) |
| Coefficient of Thermal Expansion 68-392 10 to -6 power per °F (68-392°F) | 9.8 |
| Specific Heat Capacity Btu/ lb / °F at 68°F | 0.1 |
| Modulus of Elastivity in Tension ksi | 19000 |
| Modulus of Rigidity ksi | 7500 |
| (1) Cold worked and precipitation hardened condition. Actual value is 45-48. (2) Actual value is 120-150. |
Mechanical and Electrical Properties of DIN 2.1285 (C17500) Beryllium Bronze Wires:
| Temper(*) | Heat Treatment | Tensile Strength Mpa | Elongation Percent (Min) | Electrical Conductivity Percent IACS |
| A(TB00) | / | 240~380 | 20~60 | 20~30 |
| H(TD04) | / | 440~550 | 2~20 | 20~30 |
| AT(TF00) | 3 hr 490℃ | 690~900 | ＞10 | 45~60 |
| HT(TH04 | 2 hr 490 ℃ | 750~960 | ＞10 | 48~60 |
Related Material Specifications of DIN 2.1285 (C17500) Beryllium Bronze Alloy:
Wires: ASTM B441
Rods/Bars/Tubes: ASTM B441, SAE J461, 463; RWMA Class 3
Strips: ASTM B534
Sheets: ASTM B534
Plates: ASTM B534, SAE J461, RWMA Class 3
European Standards: CuCo2Be, CuCoBe, UNS. C17500, Alloy 10, DIN 2.1285, CW104C to EN
Note:
ASTM: American Society for Testing and Materials
SAE: Society of Automotive Engineers
AMS: Aerospace Materials Specification(Published by SEA)
RWMA: Resistance Welder Manufacturers' Association
Note: Unless otherwise specified, material will be produced by ASTM.
Typical Applications of DIN 2.1285 (C17500) Beryllium Bronze Alloy:
| • Bearings and bushes |
| • Plastic moulds |
| • Corrosion resistant components |
| • Current carrying springs |
| • Welding electrodes |
| • Electrical and electronic connectors |
Product Photo:
Key Technology of Beryllium Copper(Heat treatment)
Age Hardening
Age hardening significantly enhances the material’s strength. This reaction is generally carried out at temperatures between 260°C and 540°C depending on alloy and desired characteristics. This cycle causes the dissolved beryllium to precipitate as a beryllium rich (gamma) phase in the matrix and at the grain boundaries. It is the formation of this precipitate which causes the large increase in material strength. The level of mechanical properties attained is determined by the temperature and time at temperature. It should be recognized that beryllium copper has no room temperature aging characteristics.
FAQ:
Q1:Could you produce Beryllium Copper strip by Mill Hardened process.
A1:Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06) XHMS(TM08).,we are the only factory could do harden strip in China.
Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil
2:We are the only one who melting by Vacuum semi-Continuous Furnace.
3:Surface further polishing for top clients.
Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3:Could be get the Cast ingot without gas,smaller segregation, Grain Refinement
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the amount is different.
Product Tags:
|
|
TB00 TD04 TF00 TH04 C17500 beryllium copper spring wire DIN 2.1285 Images
|
